Big discounting Big Gate Valve - Resilient Seated Cast Iron gate valve – Nortech
Big discounting Big Gate Valve - Resilient Seated Cast Iron gate valve – Nortech Detail:
Product Detail:
What is Resilient Seated Cast Iron gate valve ?
Resilient Seated Cast Iron gate valve has a plain valve bottom allowing free passage for sand and pebbles in the valve. If impurities pass as the valve closes, the rubber surface will close around the impurities while the valve is closed. A high-quality rubber compound is soft enough to absorb impurities, yet strong enough to wash the impurities through when the valve is opened again. This means that the rubber surface will regain its original shape securing a drop-tight sealing.
Resilient Seated Cast Iron gate valve Technical Specifications
| Design and Manufacture | DIN3352 F4/F5,EN1074-2/BS5163/AWWA C509 |
| Face to face | DIN3202/EN558-1/BS5163/ANSI B16.10 |
| Pressure rating | PN6-10-16,Class125-150 |
| Size | DN50-600 OS&Y Rising stem |
| DN50-DN1200 Non-rising stem | |
| Rubber wedge | EPDM/NBR |
| Appilcation | Water works/Drinking water/sewage etc |
NORTECH advantages of Resilient Seated Cast Iron gate valve
Product Show:
What is the Resilient Seated Cast Iron gate valve used for?
Resilient Seated Cast Iron gate valve are widely used in the field chemical, petroleum, natural gas designed to provide isolation and transmission of flow in a piping system or a component when closed, sometimes can be installed in the pump outlet for regulating or control of flow.
Product detail pictures:
Related Product Guide:
As for competitive selling prices, we believe that you will be searching far and wide for anything that can beat us. We will state with absolute certainty that for such excellent at such charges we are the lowest around for Big discounting Big Gate Valve - Resilient Seated Cast Iron gate valve – Nortech, The product will supply to all over the world, such as: South Korea, Maldives, Lahore, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Jocelyn from Puerto Rico - 2018.06.30 17:29
The supplier cooperation attitude is very good, encountered various problems, always willing to cooperate with us, to us as the real God.
By Marian from Benin - 2018.09.08 17:09
