High reputation Parallel Slide Valve - Forged Steel Gate Valve – Nortech
High reputation Parallel Slide Valve - Forged Steel Gate Valve – Nortech Detail:
What’s the API602 forged steel gate valve?
API602 Forged Steel Gate Valve is a special design of small sizes gate valves.
it has all the characteristics of gate valves.as normal,the opening and closing parts are the gate,in shape of a wedge,that’s the reason that they are named as wedge gate valve.the direction of motion of the gate is perpendicular to the fluid direction. The wedge gate valve can only be fully opened and fully closed and can not be adjusted and throttled.The gate valve was designed to be used either fully open or fully closed, because due to the shape of its obturators which have the shape of a wedge, if it were operated partially open, there would be a great loss of pressure and the sealing surface will be damanged under impact of the fluid.
but the API602 forged steel gate valve has its own features.it’s made in forged carbon steel,stainless steel,alloy steel,with compact body,suitable for high pressure fluid.the bonnet could be bolted,welded and pressure sealed,according to the working conditions.
Main features of the API602 forged steel gate valve?
Main features of the API602 forged steel gate valve
- 1)Rising stem with precision acme double thread for quick operation.
- 2)Body to bonnet joint designed to apply a uniform load to the gasket to assure a leak proof seal.
- 3)Solid wedge.
- 4)Stem-gate connection designed so that under severe applied loads (stuck gate), the stem will fail outside of the stuffing box pressure boundary.
- 5)Backseat designed to relieve back pressure on the stem packing when fully seated. Replacing stem packing under pressure is not recommended.
- 6)Stem packing is designed for optimum control of fugitive emissions leakage to the atmoshphere. The ultra-low emission leakage rate is assured by the fine finish on the stem sealing area, the reduced diametrical clearences and the stem straightness control.
- 7)Bellows seal is available on request
- 8)Stellite seat rings provide increased resistance to wear, abrasion and erosion of the sealing surfaces.
- 9)expanded Seat Rings.
- 10)Low fugitive emissions control.
Technical specifications of the API602 forged steel gate valve?
Specifications of API602 forged steel gate valve
| Design and manufacture | API602/BS5352/ASME B16.34 |
| Diameter(NPS) | 1/2″-2″ |
| Port(bore) | Standard port(reduced bore) and full port(full bore) |
| Pressure rating(Class) | 800lbs-1500lbs-2500lbs |
| Body materials | A105/F11/F22/F304/F304L/LF2/LF3/F316 |
| Trim materials | No.1/No.5/No.8,SS304/SS316/Monel |
| Socket weld | ANSI B16.11 |
| Thread | ASME B1.20.1 |
| Flanges | ASME B16.5,welded flange and integral flange |
| Bolted Bonnet and welded Bonnet | 800lbs-1500lbs |
| Pressure seal bonnet(PSB) | 1500lbs-2500lbs |
| NACE | NACE MR-0175 or MR-0103 |
| Test and inspection | API598 |
Product Show:
Application of API forged steel gate valves
This kind of API 602 Forged Steel Gate Valve is widely utilized in pipeline with liquid & other fluids. Petrol,oil,Chemical,Petrochemical,Power and Utilities etc，especially in conditions where high flow efficiency, tight shut off and long service is required. A wide choice of shell and trim materials do cover the whole range of applications, from the every-day type of non-corrosive service to critical service with highly aggressive media.
Product detail pictures:
Related Product Guide:
Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of High reputation Parallel Slide Valve - Forged Steel Gate Valve – Nortech, The product will supply to all over the world, such as: Bangalore, Italy, kazakhstan, We supply skilled service, prompt reply, timely delivery, excellent quality and best price to our customers. Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound items with good logistics service and economical cost. Depending on this, our products and solutions are sold very well in the countries in Africa, the Mid-East and Southeast Asia. Adhering to the business philosophy of ??customer first, forge ahead', we sincerely welcome clients from at home and abroad to cooperate with us.
By Prima from Netherlands - 2017.07.28 15:46
The goods we received and the sample sales staff display to us have the same quality, it is really a creditable manufacturer.
By Martin Tesch from Marseille - 2018.06.19 10:42
