100% Original Factory Ball Valve Wafer - Top Entry Ball Valve – Nortech
100% Original Factory Ball Valve Wafer - Top Entry Ball Valve – Nortech Detail:
What’s the top entry ball valve?
When it comes to the body style, ball valves can often be divided into side entry ball valve, top entry ball valve and fully welded ball valve.
Top entry ball valves are valves that assembled its ball from top side part. It just like a globe valve that has body and bonnet except the trim part utilize a ball type. It comprises one single body. Top entry ball valves are used in piping systems where the top of the valve can be removed to gain access to the ball and seats without removing the entire valve from the piping system. Top entry ball valves are typically used in process systems where in-line maintenance is preferred over full valve removal. Therefore it’s very common to use top entry ball valves at high pressure application that require in-frequent maintenances such as HIPPS (High Integrity Pressure Protection System) valves etc. The advantages of the top entry ball valves is its construction that allow minimal thread connection so that it will also minimize possible leak path.
It is possible to remove the bonnet of the Top entry ball valve allowing free access to the body cavity without dismantling the valve from the line. A set of special maintenance tools permits to take out both ball and seat-rings; this maintenance operation requires very little space around the valve, thus allowing it in areas where space is a limiting factor.
Top Entry ball construction is available in forged or cast execution, one-piece symmetric body closed by a bolted bonnet. It ensures that it has enough strength and rigidity under the maximum rated working pressure.The range includes both Full and Reduced bore, pressure ANSI class from 150 to 1500 , with all possible combination of ENDS connections: flanged (RF-RTJ), butt welding and HUB ends.
Main features of top entry ball valve
- Meets ASME B16.5, B16.10 and B16.34, API 608, API 598, API 607 Rev. 5/ISO 10497.
- Wall thickness complies with ASME B16.34.
- Longer cycle life.
- Lower, uniform torque.
- Blowout-proof stem.
- Multiple solid cup and cone type PTFE stem seal or graphite packing.
- Body-cover joint not affected by pipe stresses.
- Stem guides in cover and gland bushing eliminate side thrust.Two-piece self-aligning packing flange and gland.
- Fully-enclosed spiral wound graphite filled stainless body gasket.
- Live-loaded thrust washer prevents galling and provides a secondary stem seal.
- ASME Section 8 cover/body flange connectionand bolting provide high sealing integrity of body gasket.
- Permits in-line access for seat replacement.
- Can be welded into line without disassembly in accordance with Velan installation instructions.
- Stainless steel trim on all valves including handle.
- Handles with locking device, as well as extensions available.
- Locking devices standard.
- Tapping for mounting actuators standard.
- Valves can meet NACE specifications for sour gas service when required.
- Fire tested in accordance with API 607 Rev. 5/ISO 10497.
Technical specification of top entry ball valve
NORTECH developed an advanced design of the top-entry ball valves in a complete wide range of diameters and pressure classes. Top-entry valves are the perfect choice when on-line maintenance is required.
- Double Block and Bleed
- Fire Safe Design Antistatic Device
- Sealant Injection Fitting
- Locking Device
- NACE
|
Design & Manufacture standards |
API 608,API6D |
|
Face to Face Dimension |
ASME B16.10,API6D |
|
Thread Connection Dimension |
RF/BW/RTJ |
|
Pressure-Temperature Rating |
ASME B16.34 |
|
Test And Inspection |
API598,API6D |
|
Type Of Operation |
Manual gear,Pneumatic actuator,Electric actuator |
|
DN(NPS) |
2″~36″ |
|
PN(LB) |
150-1500lbs |
|
Material |
WCB,CF3,CF3M,CF8,CF8M |
|
Fire Safe Design |
API 607 or API 6FA |
The driving modes include
- handle lever operation,
- worm gear operation,
- pneumatic operation
- electric operation.
Products show
Application of Top entry ball valves
It has such advantages as top online maintenance function, small fluid resistance, simple structure, reliable sealing, convenient operation and maintenance, rapid on-off operation, flexible opening and closing, etc.
This kind of Top Entry Ball Valve is widely used in the exploiting,refining and transporting system of oil, gas and mineral. It can be also utilized to produce chemical products, medicine; production system of hydroelectricity, thermal power and nuclear power; draining system,widely utilized in pipelines and industrial systems.especially for the application when the on-line maintenance is required
Product detail pictures:
Related Product Guide:
Our pros are lessen prices,dynamic sales team,specialised QC,sturdy factories,top quality services and products for 100% Original Factory Ball Valve Wafer - Top Entry Ball Valve – Nortech, The product will supply to all over the world, such as: Russia, Bolivia, Lebanon, We taking advantage of experience workmanship, scientific administration and advanced equipment, ensure the product quality of production, we not only win the customers' faith, but also build up our brand. Today, our team is committed to innovation, and enlightenment and fusion with constant practice and outstanding wisdom and philosophy, we cater to the market demand for high-end goods, to do experienced products and solutions.
By Claire from Poland - 2018.05.13 17:00
The company can keep up with the changes in this industry market, product updates fast and the price is cheap, this is our second cooperation, it's good.
By Novia from Los Angeles - 2018.02.04 14:13
