More than 20 years of OEM and ODM service experience.

High Quality Industrial high pressure swing check valve China factory supplier Manufacturer

Short Description:

High pressure swing check valve,carbon steel,stainless steel and alloy steel

Diameter:2″-32″,Class150-Class2500

BS1868/ASME B16.34/API6D

Face to face to ANSI B16.10

Body/bonnet/Disc:WCB/LCB/WC6/WC9/CF8/CF8M

NORTECH is one of the leading China High pressure swing check valve Manufacturer & Supplier.


Product Detail

Product Tags

What's high pressure swing check valve ?

High pressure swing check valve,swing check valve designed and manufacturered according to ASME B16.34,test and inspect to API598,API6D.

That opening has to be clear in order for anything to pass through. The disc is attached to a hinge, so the disc can swing open or closed when liquid hits the disk. It's kind of like a circular door. The direction of the flow is the most important thing when using these valves.

When liquid is traveling in the desired direction, the pressure of the flow pushes the door open, allowing liquid to pass through. When liquid travels in the wrong direction, the opposite happens. The force of liquid coming back through the valve pushes the disc against its seat, closing off the valve. When installing a swing check valve, it is vital that it opens when liquid is passing through the desired direction. If you install one of these valves and no water goes through, then it is the wrong way around and must be reinstalled. If your swing check valve has a true union design, it can easily be removed from the pipeline.These valves are available in many different forms.  

 As stated before, a swing check valve is for when you want fluid traveling in only one direction. Another important detail about these valves is that they require no external power, which makes them ideal for a wide range of applications. They also let fluid pass through without slowing down the flow much when fully open.Swing check valves are usually installed in conjunction with gate valves because they provide relatively free flow.They are recommended for lines having low velocity flow and should not be used on lines with pulsating flow when the continual flapping or pounding would be destructive to the seating elements. 

Main features of high pressure swing check valve

Main Features of   high pressure swing check valve:

  • ● Body and cover: Precision machined castings.stem does not penetrate body.
  • ● Body and cover joint: spiral wound gasket,stainless steel with graphite or PTFE.
  • ● Disc assembly: Non-rotating disc is fastened securely to disc hanger with a lock nut and cotter pin. Disc hanger is supported on a sturdy disc carrier hinge pin of excellent bearing qualities. All parts are accessible from top for easy servicing.
  • ● Flanges:ASME B16.5,Class150-300-600-900-1500-2500

Technical specifications of high pressure swing check valve

Technical specifications of  high pressure swing check valve

Design and manufacturer ASME B16.34,BS1868,API6D
 Size range  2"-40"
 pressure rating (RF)  Class 150-300-600-900-1500-2500LBS
 Bonnet design  bolted bonnet,pressure seal bonnet(PSB for Class1500-2500)
 Butt weld(BW)  ASME B16.25
 End flange  ASME B16.5,Class150-2500lbs
 Body  Carbon steel WCB,WCC,WC6,WC9,LCB,LCC,Stainless steel CF8,CF8M,Dulpex stainless,Alloy steel etc
Trim  API600 Trim 1/trim 5/trim 8/trim 12/trim 16 etc

Product Show: high pressure swing check valve

swing-check-valve-6-inch-150-lb
Pressure-Seal-Check-Valve

Applications of high pressure swing check valve

This kind of  High pressure swing check valve  is widely utilized in pipeline with liquid & other fluids. 

  • *General Industrial
  • *Oil and Gas
  • *Chemical/Petrochemical
  • *Power and Utilities
  • *Commercial Applications

  • Previous:
  • Next:

  • Related Products