High Quality Pneumatic butterfly valve wafer type China factory supplier Manufacturer
What is Pneumatic butterfly valve wafer type ?
Pneumatic butterfly valve wafer type ,is also referred to as “concentric”,"rubber lined" and “rubber seated” butterfly valve,has a rubber (or resilient) seat between the external diameter of the disc and the internal wall of the valve.
Butterfly valve is a quarter-turn valve that rotates 90 degrees to open or close the media flow. It has a circular disc, also known as the butterfly, found at the center of the body that functions as the closing mechanism of the valve. The disc is connected to an actuator or handle through the shaft, which goes through from the disc to the top of the valve body.
Butterfly valve is also used as flow regulalting valve,if the disc does not rotate to a full quarter-turn, it means the valve is partially open,we can regulate the flow of fluids by various openning angle.
(CV/KV chart of resilient seated butterfly valve is available on request)
Main Features of NORTECH Pneumatic butterfly valve wafer type
Wafer Butterfly Valve design features of pinless disc
Main features of Wafer Butterfly Valve
- Compact construction results in low weight, less space in storage and installation.
- Centric shaft position,100% bi-directional bubble tightness,which makes installation acceptable at any direction.
- ISO 5211 top flange is convinient for easy automation and retrofitting of actuator.
- Inserted lining to the body, liner easy to replace,no corrosion between body and lining, suitable for end of line use.
Precision splined shaft
design for diameter DN32-DN350
Moulded rubber sleeve
Hexagon Shaft design
for diameter DN400 and above
please refer to our catalogue of butterfly valves for details or contact our sales team directly.
Technical specification of Pneumatic butterfly valve wafer type
Standards:
| Design and Manufacturer | API609/EN593 |
| Face to face | ISO5752/EN558-1 series 20 |
| Flange end | ISO1092 PN6/PN10/PN16/PN25,ANSI B16.1/ANSI B 16.5 125/150 |
| Pressure rating | PN6/PN6/PN16/PN25,ANSI Class125/150 |
| Test and Inspection | API598/EN12266/ISO5208 |
| Actuator mounting pad | ISO5211 |
Main parts materials of Wafer Butterfly Valve:
| Parts | Materials |
| Body | Ductile iron,carbon steel,stainless steel,duplex stainless steel,Monel,Alu-bronze |
| Disc | Ductile iron nickel coated,ductile iron nylon coated/Alu-bronze/stainless steel/duplex/Monel/Hasterlloy |
| Liner | EPDM/NBR/FPM/PTFE/Hypalon |
| Stem | Stainless steel/Monel/Duplex |
| Bushing | PTFE |
| Bolts | Stainless steel |
Product Application: Pneumatic butterfly valve wafer type
Where is the resilient seated butterfly valves wafer type used?
Pneumatic butterfly valve wafer type is widely used in
- Water and waste effluent treatment plants
- Paper, textiles and sugar industry
- Compressed air, gas and desulphurization plants
- Brewing, distilling, and chemical process industry
- Transportation and dry bulk handling
- Power industry
The resilient seated butterfly valves are certified with WRAS in UK and ACS in France,specially for the waterworks.
Attestation de Conformité Sanitaire
(ACS)
Water Regulations Advisory Scheme
(WRAS)
