Y Strainer ASME CLASS 150~2500
Y Strainer is designed to mechanically remove solids and other particles from fluids. They are an essential component in numerous fluid control applications to ensure no down-stream component is affected by particles within the fluid.
Y strainer is based on ASME B16.34 design, main structure for Y type with RF/RTJ and BW, The screen can be production of orifice plate structure according to the requirement or orifice plate woven net structure, TH filter has good flow properties which will has good protection for the pipes and the valve on service.
Pressure Class：ASME CLASS 150~2500
Main material：carbon steel, low temperature steel, staniless steel, alloy steel & duplex steel etc.
What is the Y Strainer used for?
Y Strainer are typically used in applications where the amount of solids to be removed is small, and where frequent clean-out is not required. They are most often installed in gaseous services such as steam, air, nitrogen, natural gas, etc. The compact, cylindrical shape of the Y-strainer is very strong and can readily accommodate the high pressures that are common in this type of service. Pressures up to 6000 psi are not unusual. When steam is being handled, high temperature can be an additional complicating factor.